Adhesive-lined Semi-rigid Heat Shrinkable tube

Shanghai RiCheng-RCCN,specialized manufacture Vinyl Wire End Caps ,Heat Shrinkable Tube,Yellow & Green Heat Shrinkable Tube,Heat Shrinkable Tube3:1.PTFE (Teflon) Rod,Hexagonal Protection Cap,HOT AIR GUN,.CE.CSA.ROHS,REACH CERT!

ALL products
Language

 

线槽 wiring duct Verdrahtungskanal 配線ダクト Canaleta Canaletas 배선 덕트 canalina Goulotte Bedradingskokers Короб перфорированный delikli kablo kanal 线槽-RSS
RCCN>>Product>>Tubes>> Adhesive-lined Semi-rigid Heat Shrinkable tube

Adhesive-lined Semi-rigid Heat Shrinkable tube

Adhesive-lined Semi-rigid Heat Shrinkable tube

Adhesive-lined Semi-rigid Heat Shrinkable tube   

Adhesive-lined Semi-rigid Heat Shrinkable tube Adhesive-lined Semi-rigid Heat Shrinkable tube Adhesive-lined Semi-rigid Heat Shrinkable tube

Product Introduction:
1.Apply to electrical insulation and seal of   wire or power cable joint,termination and   component,and etc;
2.4;1shrink radio could be applied to cover a  wider range of joint and component.
3.Semi-rigid and high mechanical capability   makes the tube provide excellent wearable  ptotection for power cable joint terminatio  -n and other component;
4.The thick adhesive forms a fluid-proof and  moisture-proof ptotective layar; 
5.Operation temperature:-45℃~125℃;
6.Minimum shrink tempeature:+125℃;
6.RoHS compliant,the outer layer is sell-  extincted.
 
Standard color: Black(Other color available upon request.)
4:1

Technical Data:

Property

Test Method

Stantard

Tensile Strength(MPa) ASTM D2671 ≥14
Elongation at Brealk ASTM D2671 ≥200
Longitudinal shrink ratio .224 ≤±10%
Volume Resistance ASTM D876 ≥1×1014
Flame Resistance .224 Outer layer is self-extinct
Copper stability 158℃,168hrs .224 Pass
Water Absorption ASTM D570 ≤0.5%

Hot Melting Adhesive Property

Property

Test Method

Stantard

Water Absorption ASTM-D570 <0.2%
Vicat Softening Point ASTM-E8 95℃
Peel Strength(PE) ASTM-D1000 120N/25m
Peel Strength(AL) ASTM-D1000 80N/25m

Specification:
  Size As Supplied Total W.T.(mm) Standard Length (m/pc)
mm inch Min.I.D. Max.I.D. Total W.T. Adhesive thickness
  Φ6.0   6 1.27 1.30±0.15 0.56±0.15 1.22
  Φ8.0 5/16 8 1.65 1.65±0.15 0.76±0.15 1.22
  Φ12.0   12 2.41 2.00±0.15 1.02±0.15 1.22
  Φ18.0   18 4.45 2.50±0.15 1.37±0.15 1.22
 

  • wiring duct
  • PVC Trunking
  • wire trunking
  • Slotted Trunking